4 WAYS TO SERVICE TRUCK BATTERIES

CHECK THE BATTERY

Do this, especially if your truck is having trouble starting. Check the charge status of your truck's battery. Full charge for flooded batteries is 12.6 volts and 12.8 volts for AGM batteries.

Check that the battery clamps and connections are secure. Then check that the battery is fully charged and test it with a load or conductivity tester (if available). If you don't have such a device, it's best to go to a truck charging repair shop that has the proper test equipment. Finally, if the battery is about 2-3 years old, consider replacing it. It's better than risking a non-starter or a costly emergency repair. Now might be a good time to think, "Where can I get a truck battery replacement nearby?"

FILL EACH BATTERY CELL WITH WATER

Do this every week or two (especially during the hot summer months). Make sure there is enough liquid in each battery cell. A battery cell that does not have enough water will not allow the battery to operate at full capacity and may shorten battery life.

To replenish the water level in the battery, open the covers on the top of the battery. Check the water level by looking into each cell. Then pour in distilled water until it reaches the full line. After that, reinstall the covers.

CLEAN THE TERMINALS

A dirty, maintenance-free battery is likely to be prone to corrosion, which prevents proper connection between terminals and cables. Improper connections cause components to malfunction and can lead to poor truck performance or even no starting.

To avoid battery corrosion, keep the terminals clean with a mixture of water and baking soda. Remove the terminals from the battery posts. Finally, clean the parts with a wire brush soaked in a mixture of water and baking soda. Finally, make sure the battery top and housing are clean and free of any dirt or debris that could cause accelerated parasitic discharge of the battery.

CHOOSE THE RIGHT TYPE OF BATTERY

This may seem simple and obvious, but not following this point will have a negative impact on battery life. Failure to choose the size and characteristics of the battery that is best suited for your truck will result in a significant decrease in battery starting power. This could result in you not being able to start your truck one day, and then you will find yourself stranded until you can find help.

When choosing a battery for your truck, be sure to check the total charging amps and cold charging amps. This will help you pick the right configuration.

For trucks operating in cold climate areas, a battery with a high cold start ampere is ideal, allowing the truck to start quickly despite cold temperatures. But for areas with moderate climates, such as Oklahoma City, you can choose a battery with the idle amps needed for the size of your engine.

CONCLUSION

This will help you check if your battery can produce enough power to reliably start your truck's engine, which is crucial when driving your truck on a daily basis to make scheduled deliveries for your business. If you find that your truck battery no longer holds a charge, it's time to tell yourself, "I need to start looking for stores that offer truck battery replacements near me."

But if something happens, you know where to go! To our repair company, Tacoma Truck Repair Center, who will do what you need. Just give us a call right now at 253-231-5500.